Prince General Purpose plywood is available in a variety of hardwood material like Gurjan, Red Gum, Alternate (Red Gum, Poplar).
It’s a premium grade general purpose plywood manufactured with Gurjan wood and bonded with MUF resin. It is available in MR grade and confirms the IS: 303 standards.
Prince Gold is MR grade plywood manufactured with hardwood Red Gum core. MUF resin is used to manufacture Prince Gold ply, which makes it tough in a high moisture-prone areas. It is an economical solution for those who want to buy better quality interior grade plywood. Since it is manufactured with MUF resin and plantation tmber, it is more environment - friendly & thus suits your interiors.
Made with quality plantation timber and loaded with strength, durability, and reliability. Prince Ultra is manufactured by using MUF synthetic resin and expert supervision at various stages to ensure quality. The hydraulically peeled off fresh logs with precise thickness and smoothness, are press-dried for flatness bringing down the moisture level of veneers up to 7%. Melamine fortified Urea Formaldehyde Resin provides a moisture-resistant bond, while special chemical treatment guards it against attacks of borer, termite, and fungus.
Prince Premium is manufactured with plantation timber Red Gum, which is known for its density and strength. Red Gum has similar properties like Gurjan and the product made with Red Gum core is a good replacement of Gurjan wood panels. Prince premium is manufactured with the utmost care by using MUF resin and it is completely treated with anti-termite borer chemical. Sanding with a wide belt sander makes it's surface smooth and calibrated.
| TECHNICAL SPECIFICATIONS (IS: 303) | |||
| Sr. No. | TEST | ISI REQUIREMENT | Observed Value |
| 1 | Moisture content | 5% - 15% | 8% |
| 2 | Dimension | Length+5mm, Width+2mm Thickness | Within Iimit |
| Thickness > 6mm - + 5%, | |||
| < 6mm - + 10% | |||
| 3 | Sp. Gravity | >7 | |
| 4 | Resistance to Water | ||
| (3 Cyckes of 8 Hr Boiling & 16 Hr Drying At 65 C) | |||
| -Adhesion To Plies | Min. Pass Standard | Excellent | |
| 5 | Resistance to Micro-Organism | ||
| -Adhesion To Plies | Min. Pass Standard | Excellent | |
| 6 | Static Blending Strength | ||
| a | Modulus of Elastivity | ||
| -Along The Grain Avg. | Min. 5000 N / sq. mm | 6500 N / sq. mm | |
| -Across The Grain Avg. | Min. 2500 N / sq. mm | 3000 N / sq. mm | |
| b | Modulus of Rupture | ||
| -Along The Grain Avg. | Min. 40 N / sq. mm | 56 N / sq. mm | |
| -Across The Grain Avg. | Min. 20 N / sq. mm | 30 N / sq. mm | |