Prince Doors IS: 2202

(Double Core 100% Pine Wood):

Prince BWP flush door is a durable product and known for its excellent quality and exceptional finish and unique dimensional stability. It is made of selected pinewood frames for high nail holding capacity. Prince flush doors have lock rails on both sides of the frame. The frame and battens used in the flush doors are well treated and assembled in such a way that there is no gaps in between the battens and frames. An extra coating of PF resin ensures the assembled flush door gets more bonding strength between core and battens.

When tested according to IS: 2202 (1) specifications all the flush doors surpassed ISI standards.

TECHNICAL SPECIFICATIONS (IS: 2202)
Sr. No.	TEST	ISI REQUIREMENT	Observed Value
1	Dimension	Length, Width - + 5 mm	Within Iimit
		Thickness - + 1 mm
2	Squareness	Deviation Not More Then 1	Deviation Below
		Mm on A Length Of 500 mm	1 mm
3	General Flatness	Twist, Cupping, Warping
		Not to Exceed 6 mm
4	Local Planeness	Depth of Deviation At Any	Within Iimit
		Point to Be Less Then 0.5 mm
5	Impact Indentation Test	Depth of Indentation Not to	Within Iimit
		Exceed 0.2 mm
6	Edge Loading Test	Deflection of Edge With Max.	Within Iimit
		to Be Less Then 5 mm
7	Shock Resistance Test	No Visible Defect After Test	No Visible Defects
8	Buckling Test	Initial Deflection - < 50 mm	Within Iimit
		Residual Deflection - < 5 mm
9	Slamming Test	No Visible Damage After Test	No Visible Damage
10	Misuse Test	No Deformation After Test	No Deformation
11	Varying Humidity Test	No Visible Warping, Twisting	No Such Defects
		or De-lamination	Observed
12	End Immersion Test	No De-lamination At The End	No De-lemination
13	Knife Test	Minimum Pass Standard	Excellent
14	Glue Adhesion Test	No De-lemination	No De-lemination
15	Screw Withdraw Test	Load To Withdraw Screw	Load - > 1000 N
		to Be More Then 1000 N

Reasons to choose Prince Door:

• Manufactured with PF Resin for higher bonding.
• Free from corrugation and roughness.
• The high screw holding capacity.
• High shock resistance.
• Boiling waterproof.
• Smooth surface.
• Lab-tested and eco-friendly.
• Zero gaps and zero bending.

The specialty of Prince Door:

• All Prince Doors are manufactured with unique strength booster Chemical.
• Prince doors are manufactured with selected and high-quality pinewood timber.
• Timbers used to manufacture Prince Doors are treated with anti-termite borer chemical before sawing.
• Frames and battens are seasoned in advance seasoning chamber for equalizing the moisture content.
• All the frames and battens are cut through the ripsaw machine and planer for equal size and thickness.
• The width of battens and frames are wider as per the specification of BIS.
• Extra lock rail is provided for the convenience of handle and lock fittings.
• Special care is taken during the assembly of battens to avoid any gap inside the door.
• High solid content waterproof PF Resin is used for high strength.
• Prince's doors are pressed with Gurjan's face and wider core in India's best hydraulic press.